Introducing the New Generation of XPRESSCUT Core Drilling Kits

Just Fit.Clip.Core, it couldn't be easier!

For years, the Clipacore XPRESSCUT Pro kit has been a trusted companion for trade professionals, offering a comprehensive solution for a wide range of core drilling tasks. Once fitted, Clipacore gives stability, precision and speed to any coring task, just Fit.Clip.Core, it couldn't be easier!

But the demands of the modern job site are always evolving. That's why we're excited to announce the next generation of core drilling excellence. The XPRESSCUT Pro is being replaced by a new, upgraded line-up of three distinct kits, each housed in a stronger, more durable case and specifically tailored to the needs of today's professionals: The Plumbers Kit, the Electricians Kit, and the all-encompassing XPRESSCUT Complete Kit.

This new range isn't just a replacement; it's a revolution. By listening to the trades, Nerrad Tools, which makes Clipacore, has created specialised kits to ensure plumbers and electricians have the precise core sizes they need most often. At the same time, the Complete Kit provides the ultimate versatility for the multi-trade expert.

The Core of the Matter: A Professional's Guide to Core Bit Sizes

Choosing the right diameter core bit is crucial for a clean, efficient, and professional job. While many sizes are versatile, certain diameters have become industry standards for specific tasks. Here’s a breakdown of what each core size is typically used for.

For Plumbers and Gas Engineers:

A plumber's day can involve anything from small pipework to large soil stacks, and having the right core bit is non-negotiable.

• 22mm & 28mm: These smaller, often longer (300mm) bits are perfect for running gas supply lines and boiler condensate pipes through exterior walls, providing a neat hole that's easy to seal.

• 42mm: This is a go-to size for 32mm (1 ¼") waste pipes, such as from a bathroom basin. It provides enough clearance for the pipe and any slight fall required for drainage without creating an oversized hole.

• 52mm: When dealing with 40mm (1 ½") waste pipes from sinks or baths, the 52mm core bit is the industry-standard choice. It allows for the perfect amount of space to seal around the pipe effectively.

• 112mm & 117mm: These sizes are commonly used for passing 110mm soil pipes through a wall, although sometimes the socket of the pipe may require some additional chiseling. The 117mm is also a frequent choice for installing standard boiler flues.

• 127mm (5-inch): This is the ideal size for most modern boiler flues, ensuring a snug fit for the flue terminal to be properly sealed against the building fabric. It's also used for 110mm soil pipes, particularly when using solvent-weld fittings which have a smaller collar than push-fit versions.

• 152mm (6-inch): For larger penetrations, such as extractor fan ducting, tumble dryer vents, and larger soil pipe systems, the 152mm core is the tool for the job. It's also used for soil pipe installations where a PipeSnug is being fitted, as this requires a 152mm hole for a 110mm pipe.

For Electricians:

Electricians require a range of core sizes for everything from single cables to bringing in the main supply.

• 25mm (1-inch): A useful size for creating neat holes for running single electrical conduits.

• 42mm & 52mm: These versatile sizes are perfect for running multiple cables, larger conduits, or creating entry points for armoured cables into a building.

• 65mm: A great general-purpose bit for electricians, ideal for creating openings for small cable trays or clusters of conduits.

• 112mm: An essential size for electricians, often used for bringing in meter tails to a consumer unit or for larger service entries.

• 152mm: When dealing with major cable ducting or ventilation for server rooms and other high-load environments, the 152mm core provides the necessary large, clean opening.

Meet the New Kits: Tailored for Your Trade

Each new kit includes the revolutionary Clipacore quick-release system for fast core changes and effortless debris removal, all packed into a new, tougher carry case built to withstand the rigours of daily use.

The XPRESSCUT Plumbers Kit (QCPBK)

Designed by plumbers, for plumbers. This kit focuses on the most common sizes needed for domestic and commercial plumbing and heating work. It contains the essential core bits for waste pipes, soil pipes, and boiler flues, ensuring you always have the right tool to hand for any pipework penetration. The kit also includes: 3 Clipacore Core Adaptors, 3 quick-release clips, HEX and SDS extension bars, a knock-out tool, guide pin, drill bit, and drift key.

The XPRESSCUT Electricians Kit (QCELK)

Arriving in January, this 15-piece kit is built for the modern electrician. It includes three strategically chosen core bits to cover the most frequent tasks:

• Core Sizes: 42mm, 112mm, and 152mm.

Also Includes: 3 Clipacore Core Adaptors, 3 quick-release clips, HEX and SDS extension bars, a knock-out tool, guide pin, drill bit, and drift key.

This selection provides the versatility to run everything from standard conduits to large service heads and ducting.

The XPRESSCUT Complete Kit (QCXPP)

The new flagship and the direct successor to the XPRESSCUT Pro. This is the ultimate all-in-one solution for the multi-trade professional who encounters a wide variety of jobs. It offers a comprehensive range of sizes for maximum versatility on-site.

• Core Sizes: 42mm, 52mm, 65mm, 117mm, and 127mm.

Also Includes: 5 quick-release spare clips, a waste removal knock-out tool, HEX and SDS extension bars, a guide pin, drill bit, and drift key.

This kit ensures you are prepared for almost any drilling task, from plumbing and electrical to general construction.

The launch of these three new XPRESSCUT kits marks a new chapter in professional core drilling. With stronger cases, trade-specific loadouts, and the same market-leading performance you expect from Clipacore, you can work faster, smarter, and more efficiently than ever before.